D-GA4 FUEL DISPENSER

D-GA4 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 310kg

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

on and noise of pump, finding whether leakage between axis end and pump cover, checking the excessive jump and swing of V wheel that is called belt wheel past, but now defined as V wheel in GBT/10412�002 General V Wheel. Don’t use water and oil with water to debug or cleanse tank in c fuel dispenser ase of the pump and components of fuel dispenser is rust. Meanwhile preventing freeze water affect the normal operation because of low temperature. Regularly inspect and cleanse strainer, especial after installation a pipeline. With the working time get long the waste in pipeline or tank decrease, the period of checking and cleanse should considerably lengthen. But don’t exceed one month. The strength of V wheel should be appropriate because low strength result in no oil discharge out or inefficiency. High strength, in another case, would increase the axis loan of motor and pump, fasting bearing abrasion of motor, pump and oil seal. Don’t adjust overflow valve to tight in case of increasing pump pressure so as to flux passing overflow valve, and well as noise, vibration and abrasion. Judgment for common failures Firstly, some failure analysis and correct judgment is necessary before maintenance. The principle of first analysis then disassemble, easy first is the basis to judge tro fuel dispenser uble. The common failure phenomenon of vane pump is that no delivery, inefficient flux, leakage, noise and abnormal vibration. They will be introduced one by one. No delivery or inefficient flux Apart from pump failure other component and pipeline trouble may also result in this phenomenon. Here only introduce pump failure and inspection method. Exterior inspection: to check motor that maybe don’t work, or rotate in opposite direction, or lose V wheel. Reversal result from wrongly connecting two phase wire in motor or power supply. Adjusting strength of V wheel or changing a new one deal with wheel slip. However, the reason that motor don’t work are several, either electric or mechanical failure. Disconnecting V wheel at first, fuel dispenser

cardconfigurationstatus　　6. EPS fails to print.　　 a. According to configuration EPS stops the transaction or voids it.　　 b. Cashier performs any attempt to fix it: if successful the transaction completes　　 successfully.　　 c. Cash fuel dispenser ier performs any attempt to fix it: if not successful the transaction aborts and　　 reverse or not according to EPS rule for the card.　　7. If not successful EPS tells POS that payment was not ok. POS is still at the initial status　　 and cashier selects another method of payment　　8. If successful EPS tells POS that payment was ok. POS prints sales receipt. Cashier gives　　 Customer EFT Ticket and Sales receipt.　　Alternative Scenario - EPS fulfils while an exception on other device happens　　This option was not chosen because of the critical role requested to the cashier.　　The only drawback of this decision could arise in a context where voiding a transaction without swiping the　　card is forbidden. The EPS application can manage this but the problem might come from the customer; this　　is considered more unlikely compared to a wrong behaviour of the cashier.　　1. EFT terminal start the host communication　　2. EFT terminal sends the display informati fuel dispenser on to the POS application IN PROGRESS ?　　3. POS application shows the display information　　4. Communication between the POS application and the EFT terminal is broken at this point　　5. EFT terminal shows the transaction result on the EFT terminal display　　6. EFT terminal could not send the transaction result and display information to the POS application.　　7. EFT terminal could not send the receipt to the POS application　　8. POS application detects that there is a communication problem and display CHECK PAYMENT　　9. Retailer checks the communication link and repairs it　　10. Retailer press the reprint key on the POS application　　11. EFT terminal send the last transa fuel dispenser

ity face “formidable barriers to employment� Nearly two-thirds of them had also been looked at by a child-service agency on suspicion of abuse or neglect. Dealing with these applicants is far more complicated than simply urging them to look for a job. Some are eligible for disabil fuel dispenser ity benefits, which remain an entitlement under Social Security Insurance (SSI). Jerry Stepaniak of Maximus—a firm that handles many social services for Milwaukee County—says that his outfit has lined up a network of doctors and lawyers who know the SSI rules inside out, and have become pretty good at judging which of his clients are eligible. The trouble, he says, is that many of those with severe limitations are unable to qualify for disability benefits. And helping them through the mechanism of welfare-to-work is far from ideal. America s second challenge, now that so many former welfare mothers have ended up in low-paying jobs, is to raise the incomes of the working poor. That means giving them skills. The earnings boost that women have achieved after leaving welfare, says Mr Grogger, tends to flatten after just a few years, as the pay gains that stem from better work habits level off. Without formal education or valuable skills, it is hard to lift incomes much further. fuel dispenser That is why America needs to treat welfare reform as a part of workforce development, says Jennifer Noyes, at the University of Wisconsin-Madison s Institute for Research on Poverty. The trouble, she says, is that the federal government runs lots of other programmes for low-income people, such as schemes giving money for job-training, but each of these is set up to serve a specific set of clients under rigid rules. It would be far better, she says, if states could combine these funds more flexibly for job-training, as they were allowed to do with welfare. That would not only help the working poor, but benefit the economy. Since American businessmen badly need skilled employees, the government s inability to help more low- inco fuel dispenser me